Vega VEGAMIP 61, Руководство по эксплуатации

Страница: 24 / 48

4
I nsert the cable into the sensor through the cable entry
F
ig
.
15
: C
onnection steps 4 and 5
5
I
nsert the wire ends into the terminals according to the wiring plan
I nformation :
S olid cores as well as fl exible cores with cable end sleeves are
inserted directly into the terminal openings . I n case of fl exible cores
without end sleeves , press the terminal with a small screwdriver ; the
terminal opening is freed . W hen the screwdriver is released , the
terminal closes again .
6
C heck the hold of the wires in the terminals by lightly pulling on
them
7
C onnect the screen to the internal ground terminal , connect the
outer ground terminal to potential equalisation
8
T ighten the compression nut of the cable entry . T he seal ring must
completely encircle the cable
9
S crew the housing cover back on
T he electrical connection is fi nished .
I nformation :
T
he terminal block is pluggable and can be removed from the
electronics
. T
o do this
,
lift the terminal block with a small screwdriver
and pull it out . W hen inserting the terminal block again , you should
hear it snap in .
24
VEGAMIP R
61
• - T ransistor
5
C onnecting to power supply
40694
-
EN
-
120228