manualshive.com logo in svg

Vega VEGABAR 81, Руководство по эксплуатации, Страница: 11 / 72

Поделиться
Скачать
Vega VEGABAR 81 Скачать руководство пользователя страница 11

11

3 Product description

VEGABAR 81 • 4

 … 20 mA

45025-EN-140228

VEGADIS 62 is suitable for measured value indication and adjustment 

of sensors with HART protocol. It is looped into the 4

 … 20 mA/HART 

signal cable.

You can find further information in the operating instructions "

VE-

GADIS 62

" (Document-ID 36469).

The protective cover protects the sensor housing against soiling and 

intense heat from solar radiation.

You will find additional information in the supplementary instructions 

manual "

Protective cover

" (Document-ID 34296).

Screwed flanges are available in different versions according to the 

following standards: DIN

 

2501, EN

 

1092-1, BS

 

10, ANSI

 B 

16.5, 

JIS B 

2210-1984, GOST

 

12821-80.

You can find additional information in the supplementary instructions 

manual "

Flanges according to DIN-EN-ASME-JIS

" (Document-ID 

31088).

Welded sockets are used to connect the sensors to the process.

You can find further information in the supplementary instructions 

"

Welded socket VEGABAR series 80

" (Document-ID 45082).

The electronics module VEGABAR series 80 is a replacement part 

for pressure transmitters of VEGABAR series 80. There is a different 

version available for each type of signal output.

You can find further information in the operating instructions "

Elec-

tronics module VEGABAR series 80

" (Document-ID 45054).

VEGADIS 62

Protective cap

Flanges

Welding socket

Electronics module

Содержание VEGABAR 81









































































Отзывы:

Нет отзывов