Vega VEGABAR 51, Руководство по эксплуатации

Страница: 30 / 80

6 S et up with the indicating and adjustment
module
PLICSCOM
6 . 1 S hort description
T he indicating and adjustment module is used for measured value
display
,
adjustment and diagnosis
. I
t can be mounted in the following
housing versions and instruments :
l
A ll sensors of the plics
®
instrument family , in the single as well as
in the double chamber housing ( optionally in the electronics or
connection compartment )
l
E xternal indicating and adjustment unit VEGADIS
61
F rom a hardware version …-
01
or higher of the indicating and
adjustment module resp . …-
03
or higher of the corresponding sensor
electronics , an integrated backlight can be switched on via the
adjustment menu . T he hardware version is stated on the type label of
the indicating and adjustment module or the sensor electronics .
N ote :
Y ou can fi nd detailed information on the adjustment in the operating
instructions manual " I ndicating and adjustment module " .
6 . 2 I nsert indicating and adjustment module
T
he indicating and adjustment module can be inserted into the sensor
and removed again at any time . I t is not necessary to interrupt the
power supply .
P roceed as follows :
1
U nscrew the housing cover
2
P
lace the indicating and adjustment module in the desired position
on the electronics ( you can choose any one of four di ff erent
positions - each displaced by
90
° )
3
P ress the indicating and adjustment module onto the electronics
and turn it to the right until it snaps in .
4
S crew housing cover with inspection window tightly back on
R emoval is carried out in reverse order .
T he indicating and adjustment module is powered by the sensor , an
additional connection is not necessary
.
F unction / C on fi guration
M
ount
/ D
ismount indica
-
ting and adjustment mo -
dule
30
VEGABAR
51
• F
oundation
F
ieldbus
6
S
et up with the indicating and adjustment module
PLICSCOM
36715
-
EN
-
110629