F7 Pianist Sustain:
Activates or otherwise the
Sustain
function in the
Pianist
mode, so you can use the
Sustain
pedal to ‘freeze’ the last
recognized chord and to freely play, right after having set the chord, along the complete keyboard. Releasing the sus-
tain pedal will allow the VEGA to recognize the next valid chord played anywhere on the keyboard.
F8 Pianist Mode:
Enables selection of the
Pianist
mode. The
AUTO
mode, set by default, requires at least a chord of three notes, played
no matter where, to acknowledge a chord. Once the chord has been acknowledged, this can be maintained playing a
melody with not more than two notes played at the same time. The
Standard
mode, is obtained using the Sustain
pedal. If the
Sustain
pedal is pressed right after having set the chord on the keyboard, the
Arranger
uses only the
chord that was acknowledged before the
Sustain
was activated. It is possible to disable the
Sustain
on the timbre in
use to utilise the
Sustain
pedal exclusively for the
Pianist
function, using
F7 Pianist Sustain
.
F9 Vocalizer:
This activates the
Vocalizer
effect on the microphone input.
F10 Rotor Wheel:
When selected, this function makes it possible to control the Rotor speed using the Modulation Wheel. If Modulation
Wheel is not selected, the Rotor activation will be controlled with the Sustain pedal just for a few organ voices pro-
grammed for this function.
PLAY CONTROL: SECOND PAGE
F1 2ND Sustain:
Activates or deactivates the Sustain on the Second Voice
F2 2ND Split:
This is used to define the split point of the keyboard, dedicated to the Right section, above which the timbre assigned
to Second Voice will not be playing. The relevant note can be selected using the keyboard.
F3 Velocity Curve:
This selects a different reaction curve for the Right voice, to be chosen among Normal, Hard 1, Hard 2, Soft 1, Soft 2 or
Fixed with a value to be programmed with the
VALUE +/-
push buttons.
F4 2ND Voice Edit:
After having pressed the
F4
function button, it will be possible to use the Voice push buttons to select a new voice to
assign to the Second Voice. Press
EXIT
after having completed the selection, or save pressing
Save/Enter
,
F6-2nd
Voice
and
F10-Save
.
F5 2ND VOICE:
This enables the second voice function.
F6 Registr:
This enables the registration.
F7 Bassist:
The
Bassist
function automatically activates the
Manual Bass
on the left keyboard section and the
Pianist
mode on
the right keyboard section and has the
Manual Bass
acting also on the acknowledgement of the chord played. Every
time you take off your hand from the right keyboard section, the chord played last on the right section remains in
memory (if the
Hold
push button is activated) whereas the
Bass
can be played freely without affecting the chord. This
is a cool feature used to reduce the redundancy that can be associated with a style and allows the musician to freely
produce natural, human bass lines in real life.
F8 Drum Remix:
When enabled (on line), this makes it possible to keep selected the
Drum Remix
function in
Song Play
also when other
Midi files are called up.
F9 Bass Boost:
This value can be modified by pressing the
F9
push button repeatedly, and indicates the increase of the frequency
indicated in
F10
, expressed in dB.
F10 Frequency:
Pressing the
F10
function button repeatedly, you modify the frequency to which equalisation is to be applied with
F9
Bass Boost
, in order to obtain more complex basses.
VEGA
36
Arranger
Содержание Ketron
