Vega C-6124, Техническое руководство

Страница: 23 / 80

17 Vega’s C-
6124
SIMUL GROUP: The group select key allows the user to Select multiple lines for simultaneous transmissions. If dial-
up lines are to be included in the group select, they must first be dialed-up and on hold.
To engage group select, press SIMUL GROUP on the display, this takes you to another screen (Figure 4.3). To
initiate one of the preprogrammed groups, simply press the corresponding number on the screen. To manually Select
a group, press
and hold the manual select button and then Select each line for the group setup.
The lines allowed in a group are restricted by the TX Block settings set in System programming mode. In
the example where line 1 blocks lines 2 and 3 the operator may include 2 and 3 in the group only if line 1 is not part of
the group. If line 1 is included in the group the console will not allow lines 2 and 3 to be added. If lines 2 or 3 are
already in the group when line 1 is Selected line 1 will be included in the group, but lines 2 and 3 will drop out.
Figure 4.3
To disengage group select, simply Select a line in the usual manner.
If more lines are to be added to a previously Selected group, carry through as before, touch and hold and Select the
desired lines. The line description will change to "Group Select Mode" when this feature is engaged.
To deselect a line from the group selected simply press the release pushbutton on the desired line.
01
02
03
04
05
06
07
08
MANUAL
SIMUL GROUP SELECT
SEL CH: MT. WILSON
<<
SQUAD 56
FIRE CAPTAIN
MAINTENANCE