VeEX RXT-6000e Скачать руководство пользователя страница 384

Страница: 384 / 387

20.0 Warranty and Software

Warranty Period:

The warranty period for hardware, software and firmware is three (3) years from the date of

shipment to the customer. The warranty period for battery pack, LCD, LCD touch panel, LCD protective cover, and

accessories (including but not limited to patch cords, AC adaptor, SFP, USB adaptors, carrying case, carrying pouch)

is limited to one (1) year.

Hardware Coverage:

VeEX Inc. warrants hardware products against defects in materials and workmanship. During

the warranty period, VeEX will, at its sole discretion, either

Repair the products

Replace hardware which proves to be defective

provided that the products that the customer elects to replace is returned to VeEX Inc. by the customer along with

proof of purchase within thirty (30) days of the request by the customer, freight prepaid.

Software Coverage:

VeEX Inc. warrants software and firmware materials against defects in materials and

workmanship. During the warranty period, VeEX will, at its sole discretion, either

Repair the products

Replace the software and/or firmware which prove to be defective

provided that the products that the customer elects to replace is returned to VeEX Inc. by the customer along with

proof of purchase within thirty (30) days of the request by the customer, freight prepaid.

Additionally, during the warranty period, VeEX Inc. will provide, without charge to the customer, all fixes, patches

and enhancements to the purchased software, firmware and software options. VeEX Inc. does not warrant that all

software or firmware defects will be corrected. New enhancements attached to a software option require the option to

be purchased (at the time of order or the time of upgrade) in order to benefit from such enhancements.

Limitations:

The warranty is only for the benefit of the customer and not for the benefit of any subsequent purchaser

or licensee of any merchandise (hardware, software, firmware and/or accessories).

Revoking the warranty:

VeEX Inc. does not guarantee or warrant that the operation of the hardware, software or

firmware will be uninterrupted or error-free. The warranty will not apply in any of the following cases:

Improper or inadequate maintenance by the customer

Damage due to software installed by the customer on the unit without prior authorization (written) from VeEX

Inc.

Unauthorized alteration or misuse

Damage occurred from operating the unit from outside of the environmental specifications for the product

Improper installation by the customer

Go back to top

Go back to TOC

RXT-6200_RXT6000e_Module_Manual

Page 384 of 387

Содержание RXT-6000e




































































































































































































































































































































































































Результаты поиска

Содержание RXT-6000e

Отзывы:

Похожие инструкции для RXT-6000e

Бренды по названию

Популярные бренды

VeEX RXT-6000e, Руководство пользователя

Результаты поиска

Содержание RXT-6000e

Отзывы:

Похожие инструкции для RXT-6000e

Бренды по названию

Популярные бренды