VeEX RXT-6000e Скачать руководство пользователя страница 36

Страница: 36 / 387

In DS1 mode, the options are unframed, D4 (SF) and ANSI T1.107 (ESF).

In DS3 mode, the options are unframed, M13 and C-Parity.

In E1 mode, the options are unframed, PCM31, PCM31C, PCM30, and PCM30C. Framing conforms to G.704 and

G.706 recommendations and are briefly described below.

In E3 mode, the options are unframed, framed G.751.

Go back to top

Go back to TOC

Pattern

Tapping the Tx Pattern box opens the Tx Pattern Setup screen.

Tx Pattern Setup

Pattern:

Use the pattern drop-down box to select the test pattern which will be inserted into the transmitted signal.

Pseudo Random Bit Sequences (PRBS) defined by ITU-T 0.150 and 0.151 standards, fixed words and 24-bit or 32 bit

user defined patterns are available. Note, if the 32 bit user pattern entered is incorrect, the default pattern will be

0xFFFFFFFF.

Invert:

Inversion of polarity is also available.

Go back to top

Go back to TOC

6.3.2 Receiver Setup

Hierarchy

Tapping the Hierarchy setup box opens the Rx Hierarchy screen. The Hierarchy setup options for the Rx are the same

as for the Tx described previously.

Rx Hierarchy Setup

RXT-6200_RXT6000e_Module_Manual

Page 36 of 387

Содержание RXT-6000e




































































































































































































































































































































































































Результаты поиска

Содержание RXT-6000e

Отзывы:

Похожие инструкции для RXT-6000e

Бренды по названию

Популярные бренды

VeEX RXT-6000e, Руководство пользователя

Результаты поиска

Содержание RXT-6000e

Отзывы:

Похожие инструкции для RXT-6000e

Бренды по названию

Популярные бренды