Console Wiring Inputs
Safety Precautions
9
Ethernet Ports
1 Ethernet port standard, labeled ETH 1 (Item 7 in Figure 1)
1 Optional Ethernet port (Switch ETH 2 and ETH 3) (Item 8 in Figure 1)
Factory Installed
Optional Modules
(One module per
console)
Optional CDIM module - Two RJ-45/RJ-485 serial ports, labeled CDIM 1 and CDIM 2 (Item 9 in Figure 1)
Optional IFSF module - One IFSF port, labeled IFSF LON (Item 9 in Figure 1). The IFSF cable’s plug will have to be
assembled in the field as shown below:
USB Ports
2 USB ports, labeled USB 1 and USB 2 (Item 10 in Figure 1)
Expansion Port
10-pin connector VR bus, labeled EXPANSION (Item 11 in Figure 1)
Legend
Pin
Signal
Pin
Signal
1
+W
6
Ground
2
-W
7
+24 Vdc
3
+15 Vdc
8
+Expansion Bus
4
Ground
9
– Expansion Bus
5
N/C
10
Expansion Reset
Table 1. TLS4 Wiring Inputs
Connector
Description
2-pin IFSF plug with cable
standoff and two small slots
for Tie Wrap
2 conductor LON cable
supplied by customer
Cover snaps onto plug enclosing
connections
From the outside of the housing piece thread tie wrap up through one of
the small slots in the plug body, around the LON cable and back out through
second slot. Push tie wrap through self-locking head and pull tight to secure
cable against cable standoff.
Cable
Housing
Tie wrap
A - A
A
A
1 2 3 4 5 6 7 8 9 10
Содержание TLS4/8601 Series
Страница 1: ...Manual No 577014 058 Revision C Troubleshooting Manual TLS4 8601 Series Consoles...
Страница 43: ......