VEDUM Wine shelf, Инструкция по эксплуатации, Страница: 42 / 66

43
WALL SHELVES with hidden spear fittings art. no. 39005 fitted with
accompanying bracket, drill Ø4 mm. Where required use plugs; drill pilot
holes Ø8 mm. Measure on the wall where the shelf will be attached; fit
the brackets. Adjust the gradient with the small screws. Push on
the shelf.
The maximum load with two shelf braces, including shelf length
300 mm, is 3 kg, and including shelf length 1200 mm is 12 kg. Vertical
and sideways adjustment each ± 4 mm.
6. Installation of details
6.5 WALL SHELVES
295
220
WARDROBE SHELVES
The recommended spacing between the consoles is
max. 600 mm. Max. load per console 10 kg.
WOOD AND
GLASS
SHELVING
SYSTEMS
KALABRONE
KALABRONE
REGISTERED DESIGN
8-30 mm
mm
25 kg for each shelf support
for shelf 320 mm deep
DEPTH IN MM
LOAD IN KG
+ shelf weight = 25 kg MAX
for each shelf support
Inclination adjustment
shelf locking
25
37,5
50
160 240
320
It is the responsability of the customer:
- to ensure that the wall is of a suitable quality to hold the shelf fi xing in place.
- to use the proper hardware fi ttings according to the construction of the wall.
COMBINATION SHELF LOAD AND SHELF DEPTH
(The fi gures refer to 1 shelf support)
INSTALLATION AND ADJUSTMENTS
WOOD PANEL SOLID AND PLASTERBOARD WALLS BRACKET ALIGNMENT
Recommended fi xing countersunk
screw type - head Ø 5 mm max.
3
3
320 MAX
SHELF LOCKING AND INCLINATION ADJUSTMENT
320 MAX
3 MAX
cross PH2
screwdriver
cross PZ2
screwdriver
For more specifi c information, please refer to the WARNINGS section at the end of the catalogue.
www.italianaferramenta.com
KALABRONE is the new shelf support for free-standing shelves created by Italiana
Ferramenta Srl. Boasting a captivating design, it perfectly meets the actual market
demands.
It is suitable for shelves from 8 to 30 mm thick. Its solid structure guarantees a
capacity loading of 25 kg for each support with a shelf 320 mm deep.
KALABRONE comes with 2 adjustments:
- Vertical: through the oval hole positioned on the upper bracket
- Inclination: through an adjustable screw positioned on the main support
The soft element made of engineering plastic positioned on the upper bracket
guarantees a perfect adhesion to the shelf, thus a voiding that the shelf is accidentally
removed.
WOOD AND
GLASS
SHELVING
SYSTEMS
KALABRONE
KALABRONE
REGISTERED DESIGN
8-30 mm
mm
25 kg for each shelf support
for shelf 320 mm deep
DEPTH IN MM
LOAD IN KG
+ shelf weight = 25 kg MAX
for each shelf support
Inclination adjustment
shelf locking
25
37,5
50
160
240
320
It is the responsability of the customer:
- to ensure that the wall is of a suitable quality to hold the shelf fi xing in place.
- to use the proper hardware fi ttings according to the construction of the wall.
COMBINATION SHELF LOAD AND SHELF DEPTH
(The fi gures refer to 1 shelf support)
INSTALLATION AND ADJUSTMENTS
WOOD PANEL SOLID AND PLASTERBOARD WALLS BRACKET ALIGNMENT
Recommended fi xing countersunk
screw type - head Ø 5 mm max.
3
3
320 MAX
SHELF LOCKING AND INCLINATION ADJUSTMENT
320 MAX
3 MAX
cross PH2
screwdriver
cross PZ2
screwdriver
For more specifi c information, please refer to the WARNINGS section at the end of the catalogue.
www.italianaferramenta.com
KALABRONE is the new shelf support for free-standing shelves created by Italiana
Ferramenta Srl. Boasting a captivating design, it perfectly meets the actual market
demands.
It is suitable for shelves from 8 to 30 mm thick. Its solid structure guarantees a
capacity loading of 25 kg for each support with a shelf 320 mm deep.
KALABRONE comes with 2 adjustments:
- Vertical: through the oval hole positioned on the upper bracket
- Inclination: through an adjustable screw positioned on the main support
The soft element made of engineering plastic positioned on the upper bracket
guarantees a perfect adhesion to the shelf, thus a voiding that the shelf is accidentally
removed.
The shelf braces should be screwed
to a suitable wall. Screws are not
included; the recommended type of
screw is countersunk head Ø5 mm.
Make sure the shelf brackets are
positioned on a horizontal line.
Locking the shelf into the
shelf bracket. Adjustment of the shelf gradient.
WOOD AND
GLASS
SHELVING
SYSTEMS
KALABRONE
KALABRONE
REGISTERED DESIGN
8-30 mm
mm
25 kg for each shelf support
for shelf 320 mm deep
DEPTH IN MM
LOAD IN KG
+ shelf weight = 25 kg MAX
for each shelf support
Inclination adjustment
shelf locking
25
37,5
50
160 240
320
It is the responsability of the customer:
- to ensure that the wall is of a suitable quality to hold the shelf fi xing in place.
- to use the proper hardware fi ttings according to the construction of the wall.
COMBINATION SHELF LOAD AND SHELF DEPTH
(The fi gures refer to 1 shelf support)
INSTALLATION AND ADJUSTMENTS
WOOD PANEL SOLID AND PLASTERBOARD WALLS BRACKET ALIGNMENT
Recommended fi xing countersunk
screw type - head Ø 5 mm max.
3
3
320 MAX
SHELF LOCKING AND INCLINATION ADJUSTMENT
320 MAX
3 MAX
cross PH2
screwdriver
cross PZ2
screwdriver
For more specifi c information, please refer to the WARNINGS section at the end of the catalogue.
www.italianaferramenta.com
KALABRONE is the new shelf support for free-standing shelves created by Italiana
Ferramenta Srl. Boasting a captivating design, it perfectly meets the actual market
demands.
It is suitable for shelves from 8 to 30 mm thick. Its solid structure guarantees a
capacity loading of 25 kg for each support with a shelf 320 mm deep.
KALABRONE comes with 2 adjustments:
- Vertical: through the oval hole positioned on the upper bracket
- Inclination: through an adjustable screw positioned on the main support
The soft element made of engineering plastic positioned on the upper bracket
guarantees a perfect adhesion to the shelf, thus a voiding that the shelf is accidentally
removed.
WOOD AND
GLASS
SHELVING
SYSTEMS
KALABRONE
KALABRONE
REGISTERED DESIGN
8-30 mm
mm
25 kg for each shelf support
for shelf 320 mm deep
DEPTH IN MM
LOAD IN KG
+ shelf weight = 25 kg MAX
for each shelf support
Inclination adjustment
shelf locking
25
37,5
50
160
240
320
It is the responsability of the customer:
- to ensure that the wall is of a suitable quality to hold the shelf fi xing in place.
- to use the proper hardware fi ttings according to the construction of the wall.
COMBINATION SHELF LOAD AND SHELF DEPTH
(The fi gures refer to 1 shelf support)
INSTALLATION AND ADJUSTMENTS
WOOD PANEL SOLID AND PLASTERBOARD WALLS BRACKET ALIGNMENT
Recommended fi xing countersunk
screw type - head Ø 5 mm max.
3
3
320 MAX
SHELF LOCKING AND INCLINATION ADJUSTMENT
320 MAX
3 MAX
cross PH2
screwdriver
cross PZ2
screwdriver
For more specifi c information, please refer to the WARNINGS section at the end of the catalogue.
www.italianaferramenta.com
KALABRONE is the new shelf support for free-standing shelves created by Italiana
Ferramenta Srl. Boasting a captivating design, it perfectly meets the actual market
demands.
It is suitable for shelves from 8 to 30 mm thick. Its solid structure guarantees a
capacity loading of 25 kg for each support with a shelf 320 mm deep.
KALABRONE comes with 2 adjustments:
- Vertical: through the oval hole positioned on the upper bracket
- Inclination: through an adjustable screw positioned on the main support
The soft element made of engineering plastic positioned on the upper bracket
guarantees a perfect adhesion to the shelf, thus a voiding that the shelf is accidentally
removed.
Depth of shelf in mm
Load in k
g
Max. load
per shelf brace = 25 kg
Use Phil-
lips-head
screwdriver
PZ2
Use Phillips-head
screwdriver PH2
Max. 320 mm
Max. 320 mm
Max
. 3 mm
The load in kg per shelf brace is relative to the depth of
the shelf in mm. Max. load per shelf brace: 25 kg.
WALL SHELVES WITH STEEL SHELF BRACES
ART. NO. 39009