VEDUM Wine shelf Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 66

VEDUM Wine shelf Скачать руководство пользователя страница 30

31

Crown moulding strip, side

Light bar, side

Crown moulding strip

Light bar, front edge under door

Light bar

3.6 CROWN MOULDING STRIPS AND LIGHT BARS

Crown moulding strips B and straight are fitted with angle braces and
screws (TKX Ø4x15). The positioning of the crown moulding strip on the
front of wall cabinets/tall cabinets is a matter of taste, but the images
provided are recommendations. In type B, the strip sits with half its width
outside the frame. In type D, the bevel sits on the bottom part of the strip,
level with the front of the frame. A straight combination strip is placed so
that the radius is outside the door. In the case of a rustic combination strip,
this can also be installed with some type of strip instead of an angle brace
(not included in the delivery from Vedum).

Installing crown moulding strips on the side of a wall cabinet/tall
cabinet. The positioning constitutes alternative recommendations.
In type B, the back of the strip sits in the middle of the cabinet side.
In type D, it sits with the screw in the centre of the cabinet side (NB:
always drill pilot holes). In combination strips, they sit so that the
radius is outside the side.

The light bar is fitted with an angle brace and screws (TKX Ø4x15).
Positioning of the light bar on the front of a wall cabinet is a matter of
taste, but the images provided are recommendations. In types A and B, the
strip sits with half its width outside the frame. Combination strip, straight is
fitted so that the radius is level with the door.

Fitting the light bar on the side of a wall cabinet is a matter of taste, but
the images provided above are recommendations. In type B, the strip is
positioned such that the round portion sits outside the side. In combination
strip, straight, the strip is positioned such that the radius is outside the side.
In combination strip, straight, painted version, the joint for the covering
should be turned towards the cabinet. In the case of a fan, you should mitre
in the light bar strips and install the light bar strip against the wall.

3. Installing wall cabinets

Combi-
nation
strip B
3852

Crown
moulding
strip D
3854

Combina-
tion strip,
straight
3857

Combination
strip, straight
3856,
3858,
3885

Crown moulding strip, front edge over door

Ceiling connector and crown moulding
strip in combination, side.

Ceiling connector and crown moulding
strip in combination, front edge over door.
Dimensions from the wall to the mounting
block: for wall cabinet 302 mm, for tall
cabinet 580 mm.

A
3851

Combination
strip B
3852

Combination
strip
straight
3857

A
3851

Combina-
tion strip B
3852

Combina-
tion strip
straight
3857

Combi-
nation
strip,
rustic
3859

Combi-
nation
strip B
3852

Crown
moulding
strip D
3854

Combi-
nation
strip,
straight
3857

Combina-
tion strip,
straight
3856,
3858,
3885

Combi-
nation
strip,
rustic
3859

Combina-
tion strip,
rustic
3859

Combina-
tion strip,
rustic
3859

Combina-
tion strip,
straight
3856,
3858,
3885

Combi-
nation
strip,
straight
3856,
3858,
3885

In the case of smaller distances
between cabinet and ceiling, an
articulated screwdriver may be
required.

«
...
28
29
30
31
32
...
»

Содержание Wine shelf



































































Отзывы:

Нет отзывов