Vectrix VX-2, Руководство по обслуживанию

Страница: 65 / 78

VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION E-2: MALFUNCTIONS
-
No Top Speed
-
Check setting of the controller
-
Check correct function of the throttle, adjust or exchange if needed
-
No function and no indication on Speedometer
-
Check Fuse 1 (15A) of the converter
-
Check voltage on Controller power in line (red and black thick wire) should be
higher than 36 V.
-
Converter broken
-
Full function but no indication on Speedometer
-
Check connection of the speedometer
-
Speedometer broken
-
No indication of the energy bar on Speedometer
-
Check Voltage of the battery
-
Check Voltage on Pin 1 of the speedometer connector. Should be the battery
Voltage
-
Speedometer or controller broken or wire between controller and speedometer
-
No indication of the consumption bar on Speedometer
-
Check Voltage of the battery
-
Check Voltage on pin 1 of the Speedometer connector. Should be the battery
Voltage
-
Speedometer or Controller broken or wire between Controller and Speedometer
-
No change of battery voltage and mph/kph on Speedometer
-
Check correct function of MODE switch
-
Mode switch or Speedometer broken
-
No indication of speed on Speedometer but motor running is okay
-
Check if the Voltage on Pin 5 of the speedometer connector. Should change if
Motor is turned by hand.
Speedometer or Controller broken or wire between Controller and Speedometer
https://www.motorcycle-manual.com/