Vectrix VX-2, Руководство по обслуживанию

Страница: 8 / 78

VECTRIX VX-2 SERVICE MANUAL
Version 1.0/July 2011
VECTRIX, LLC
SECTION B-2: FRONT CONSOLE COVER/WIND DEFLECTOR
Locate four Phillips screws underneath the Front Console
Cover/Wind Deflector and remove
Slide in a flat screwdriver into the position as seen on the
picture. Hold the front console cover by hand. Carefully
turn the screwdriver counter-clockwise [ccw] (left side) and
clockwise [cw] (right side) until the front cover snaps out.
From the rear of the assembly, unscrew the four Phillips
screws (left and right position) with a Phillips screwdriver
PH2
Remark: For assembling the Front Console Cover/Wind Deflector, please make sure the
attachment points are in the correct position and no edge is protruding. Insert the screws
slightly and if all screws and the cover are in the correct positions, then tighten them fully.
https://www.motorcycle-manual.com/