Vector Revolution 180, Руководство по эксплуатации

Страница: 13 / 151

Safety
2
_____________________________________________________________ ___________________________
_______________________________________
2- 3
The operator must help to ensure that no unauthorised personnel use the machine /unit.
The operator
undertakes to report immediately any changes occurring at the machine/unit that
affect safety.
The user must undertake to operate the machine/unit only when it is in fault-free condition.
The user’s factory must ensure that the machine/unit workplace is kept clean and unobstructed by
means of appropriate and checks.
Unauthorised conversions and modifications affecting the safety of the machine/unit are not
permitted.
No work must be carried out on the machine/unit unless it is at a standstill.
Before starting work on the machine/unit, its drive units and additional features must be safe
against inadvertent switch-on, for example by a padlock on the master switch.
Remove the safety equipment only when the machine has come to a standstill and the master
switch has been secured.
Before starting, check whether all safety equipment is in place.
The load-carrying capacity of the lifting gear to be installed must be at least sufficient for the
weight to be lifted.
After electrical fitting or repair work, the safety measures taken must be tested (e.g. earthing
resistance)
The local safety and accident prevention regulations shall apply in any event for the operation of
the machine/unit.
Ear protectors must be worn when the work involves a lot of noise.
Never reach into the machine/unit while it is in operation, nor behind panels, between the support
table and the perspex front cover or into obscured areas.
Always comply with
- the pertinent accident prevention regulations
- the generally accepted technical safety rules and traffic regulations
- Country-specific regulations