Vector Fog bm100, Инструкция по эксплуатации

Страница: 2 / 12

2
INSTRUCTION MANUAL VECTORFOG BM100 BACKPACK MIST SPRAYER
When spraying outdoors, you should only spray for short periods at a time and when there is not much
wind. When fogging indoors you should start at the furthest part of the building and work your way back
until you get to the entrance or exit.
It’s essential to read the chemical manufacturer’s instructions before you start applying, including
diluting ratio and safety precautions. Only experienced personnel should operate this equipment.
You must exercise caution if fuel or chemicals are spilt, in order to avoid the risk of fire or contamination.
Is essential the use of protective equipment when handling chemicals and for this machine in particular.
Incorrect use of this equipment or handled by unqualified personnel could result in serious risk of injury,
bad results when applying or create faults in the machine which are NOT covered under guarantee.
Caution Marks
Please read this manual before using the equipment.
You must wear protective equipment (face/breathing mask, protective
clothing, gloves, etc.) when handling potentially hazardous chemicals.
It is advisable to wear ear plugs to protect the user from the high noise
produced by the machine.
The interior of the machine heats up to high temperatures. Do not add fuel or
chemicals during the operation of the machine or when it is hot after use.
Avoid spraying chemicals upwind.
Risk of electric shock. Do not turn on the machine when the spark plugs
electrode is exposed.