Vector Fog bm100, Инструкция по эксплуатации

Страница: 8 / 12

8
STARTING THE MACHINE
Before starting, place the unit on a clear patch of ground. Make sure you have a firm foothold,
keep a firm grip on the machine and check that there are no objects which could be sucked in
by the fan (between engine and back plate).
To start the machine, hold the top of the machine with your left hand and put one foot on the
base plate to prevent the machine from slipping while starting. Open the fuel valve by sliding
the switch up to the open position. Pull the starter grip slowly with your right hand until you
feel the rope go taught then give it a short fast pull. Do not pull the starter rope out more than
about 15 inches as it might break if pulled too far.
Do not let go of the starter rope rather guide it slowly back into the housing so that it can
rewind correctly.
Continue cranking the engine until it begins to fire. Then open the choke immediately.
To stop the engine, slide the stop switch to “CLOSED”
1. Open the Fuel Valve
2. Pull the starter until taught 3. Quickly pull the started until 4. Return the starter without
the engine is running letting go
5. To stop the engine slide the Fuel Valve down to the closed position.