Vector Fog bm100, Инструкция по эксплуатации

Страница: 7 / 12

7
FILLING THE FUEL AND CHEMICAL TANKS
This engine is certified to operate on unleaded petrol and with the mix ratio 50:1. Your engine
requires a mixture of gasoline and quality two-stroke engine oil with the classification TC. Use
regular unleaded gasoline with a minimum octane rating of 90 RON. If the octane number of
the regular grade gasoline in your area is lower use premium unleaded fuel.
Do not use BIA or TCW (two-stroke water cooled) mix oils!
The canister should be kept tightly closed in order to avoid any moisture getting into the
mixture.
The fuel tank and the canister in which fuel mix is stored should be cleaned from time to time.
Before fuelling, clean the filler cap and the area around it to ensure that no dirt falls into the
tank.
Thoroughly shake the mixture in the canister before fuelling your machine.
To reduce the risk of burns or other personal injury from escaping gas vapour and fumes,
remove the fuel filler cap carefully so as to allow any pressure build-up in the tank to release
slowly.
After fuelling, tighten fuel cap as securely as possible by hand.
1. Remove Fuel Cap 2. Remove Fuel Filter 3. Fill with fuel
4. Replace filter and cap.