Vecow RCS-9412F-GTX1080, Руководство пользователя

Страница: 44 / 142

36
GETTING TO KNOW YOUR RCS-9000F GTX1080 ©Vecow RCS-9000F GTX1080 User Manual
2.2.9 10/100/1000 Mbps Ethernet Port
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections on the front side of RCS-9000. LAN 1 is powered by Intel
®
I219LM
Ethernet engine, and LAN 2 is powered by Intel I210 Ethernet engine. When
LAN 1 works in normal status, iAMT 11.0 function is enabled. When LAN 2 works
in normal status, iAMT 8.0 function is enabled.
Using suitable RJ-45 cable, you can connect the RCS-9000 system to a
computer or to any other devices with Ethernet connection, for example, a hub or
a switch. Moreover, both LAN 1 and LAN 2 support "Wake" on LAN and preboot
functions. The pinouts of LAN 1 and LAN 2 are listed in the following chart :
Pin No. 10/100Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ---- MDI2_P
5 ----- MDI2_N
6 E_RX- MDI1_N
7 ----- MDI3_P
8 ------ MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED
Location
LED Color 10Mbps 100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left Yellow
Blinking
Yellow
Blinking
Yellow
Blinking
Yellow
Isolated DIO 2
COM 2
COM 1
DVI-D
DVI-I
|
LAN 2
DP
|
LAN 1
COM 4 COM 3
Isolated DIO 1
V+ V-
On | Off
DC-IN
IGN
SIM 2
SIM 3
RST
1 8