104
BIOS AND DRIVER SETTING
©Vecow RCS-9000F GTX1080 User Manual
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
S0 State: Always turn-on the system when power source plugged-in.
S5 State: Always turn-off the system when power source plugged-in.
4.4.2.1 PCI Express Configuration of PCH-IO
Figure 4-4-2-1: PCH-IO Settings
DMI Link ASPM Control
Enable/Disable the control of Active State Power Management on SA side of the
DMI Link.
Native PCIE Enable
PCIE Express Native Support Enable/Disable.
Intel
®
Ethernet Controller I210
Bios options for PCIe device on Intel
®
Ethernet Controller I210 LAN
.
miniPCIe Slot 1~3
Bios options for PCIe devices on miniPCIe Slot.
PCI Express x4 Slot
Bios options for PCIe device on PCI Express x4 Slot
.
Содержание RCS-9412F-GTX1080
Страница 75: ...67 HARDWARE INSTALLATION Step 3 Remove two M3x5L screws Push down the PCIe x16 slot lock and remove GTX 1080...
Страница 77: ...69 HARDWARE INSTALLATION Take off the bottom cover Remove three F M3x4 screws on the rear...
Страница 81: ...73 HARDWARE INSTALLATION Sequence 2 Sequence 3...
Страница 82: ...74 HARDWARE INSTALLATION Vecow RCS 9000F GTX1080 User Manual Step 8 Take off the SATA cable...