105
BIOS AND DRIVER SETTING
4.4.2.2 SATA and RST Configuration
Figure 4-4-2-2
: SATA And RST Settings
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
Options for each SATA port:
Port n
Enable or disable SATA Port.
Hot Plug
Designated this port as Hot Pluggable.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
Содержание RCS-9412F-GTX1080
Страница 75: ...67 HARDWARE INSTALLATION Step 3 Remove two M3x5L screws Push down the PCIe x16 slot lock and remove GTX 1080...
Страница 77: ...69 HARDWARE INSTALLATION Take off the bottom cover Remove three F M3x4 screws on the rear...
Страница 81: ...73 HARDWARE INSTALLATION Sequence 2 Sequence 3...
Страница 82: ...74 HARDWARE INSTALLATION Vecow RCS 9000F GTX1080 User Manual Step 8 Take off the SATA cable...