background image

 
 

Limited Warranty Policy 

 

Veco NA, LLC (Company) warrants that if any part of a new system that includes the accompanying 
product proves to be defective to the original user in material or workmanship within the limits of the 
schedule below, the company will, at the company's option, either replace or repair that part without 
charge. 

 

Compressor (excluding Controller): ….. 5 years from date of purchase or purchase of a new vessel 
Electronic components:  ………………. 2 years from date of purchase or purchase of a new vessel   
Mechanical components: ……………… 1 year from date of purchase or purchase of a new vessel 

 

Note 

-

 

Items sold individually, i.e. not as part of a complete system, carry a one year warranty only. 

 

-  Items replaced or repaired under warranty are covered only for the remainder of the term of 

the original warranty. 

 

This warranty does not cover: 

 

 

Any field labor or other costs for inspection, testing, removal, transportation, or installation of any 
component unless pre-authorized by the Company and issuance of an RMA number.  

 

 

Damage,  failure,  or  malfunction  due  to,  or  arising  from,  improper,  faulty,  or  unapproved 
installation,  servicing,  and/or  application,  and  from  failing  to  strictly  follow  the  guidelines 
included with the equipment and in the Installation & Instruction Manual.  

 

 

Any component of a system that is not comprised solely of Frigoboat supplied refrigeration parts, 
or parts supplied or expressly approved by Coastal Climate Control, Inc. 

 

 

Damage, failure, or malfunction resulting from accident, misuse, abuse, neglect, mishandling, 
alteration, modification, Acts of God, or service by personnel other than those pre-authorized by 
the Company.   

 

 

Damage, failure, or malfunction resulting from inadequate or faulty power supply to the system, or 
improper, faulty, or unsafe vessel wiring. 

 

 

Damage,  failure,  or  malfunction  due  to  foreign  substances  being  injected  into  the  system, 
including, but not limited to; additional refrigerant oil, “conditioner”, flushing fluid, Thawzone, 
leak stopper and/or leak detecting liquid, etc. 

 

No responsibility is assumed for injury, illness or death due to medical supplies and/or drugs being 
subjected to incorrect temperatures while stored in an application cooled by a Frigoboat refrigeration 
system. 
No responsibility is assumed for any special, incidental, or consequential damages. 

Note

  Some states do not allow the exclusion or limitation of incidental or consequential damages so 

the above exclusion or limitation may not apply.  

 

 

In the event of a component or system failure or malfunction, please contact the dealer you purchased 

the system from. If further help is required, please call Veco NA, LLC at 301 352 6962. If requested, return 
faulty  part,  freight  pre-paid,  together  with  proof  of  purchase.  No  returns  will  be  accepted  without  prior 
authorization and the issuance of an RMA number by Veco NA. Damage due to shipping is not covered in this 
warranty and so it is suggested that the shipment be insured by the sender. If the part(s) is found to be defective 
due to faulty materials or workmanship, it will be repaired or replaced free of charge and shipped freight pre-
paid to an address within the contiguous USA. 

If warranty service is required in areas other than North America and the Caribbean, please visit the 

manufacturer’s web site at www.veco.net. 

Содержание Frigoboat Capri 35F




















Отзывы: