![background image](http://html1.mh-extra.com/html/vdo/pn-2050/pn-2050_quick-start-manual_3740141024.webp)
47
Troubleshooting
Problem
Solution
No GPS signal in vehicle
The GPS signal can be blocked by heated windscreens or
tinted windscreens with a vacuum-metallised surface. In this
case, you will need an external GPS antenna. (available from
accessory dealers, Article-no. MA2010/00)
No GPS signal
Make sure that the GPS antenna on the top of the naviga-
tion system is not obstructed by other objects.
Poor-quality GPS signal
Always keep the navigation system positioned vertically.
The navigation system no
longer responds to finger
taps or doesn't switch off.
If the navigation systems stops responding to your actions,
you can press the reset button on the bottomside of the de-
vice (e.g. with a straightened-out paper clip or a pencil). The
data you have saved will not be lost! Restart the navigation
system by pressing the power button.
System doesn't start, screen
remains blank.
Make sure that the battery is fully charged and/or that the
device is connected to a power source. If you are using the
DC cable, check that the plug is securely and correctly con-
nected to the cigarette lighter.
The system shuts itself down
after a certain time in opera-
tion.
In the case of extremely low or high temperatures, the sys-
tem will temporarily shut down to prevent itself from being
damaged. It will switch itself on again once the temperature
has returned to normal. A sudden shutdown is also possible
when the battery is empty.
The voice alerts for naviga-
tion cannot be heard.
Check whether the volume is set to an audible level in the
basic settings.
Navigation is not accurate.
A level of inaccuracy of 50 m is within acceptable limits. If a
higher level of inaccuracy occurs repeatedly, please contact
an authorised specialised dealer.
Driving/navigation instruc-
tions do not correspond to
the actual traffic situation.
It may be the case that the position determined by the nav-
igation system is at the moment incorrect. The current traf-
fic situation may have changed and therefore does not
correspond to the information on the map.
No sound
In case of no sound, mute might be on or the volume is low.
Only English voice
All voices are on the SD card. When the SD card is inserted
in the navigation device, these voices will be available on
the navigation system. By removing the SD card, only the
English voice will be available.
Troubleshooting
QSG-PN2050-3000.book Seite 47 Montag, 23. Oktober 2006 3:09 15