![background image](http://html1.mh-extra.com/html/vdo/ms-3100/ms-3100_owners-manual-and-mounting-instructions_3727222040.webp)
SDVC Mode (Speed dependent volume control)
This is to compensate the surrounding noise by increasing the volume level of
guidance advice depending on the car’s speed.
You can select between 5 different SDVC settings (OFF = off; 4 = maximum increase).
☞
Move the cursor to the Mode value.
☞
Push the
OK
key.
☞
Select the desired SDVC mode.
☞
Push the
OK
key to store the selection.
Find a suitable compensation by trying out the different modes.
System information
The “
System information
” menu shows you information on soft- and hardware
versions of the system (for service purposes).
Service
For analysing hardware and software problems (code protected).
The “
Service
” menu should only be entered for service of the Navigation System by
an authorized service centre.
Trip Computer
☞
Select the “
Trip computer
” option from the “
System settings
” menu.
You can perform the following settings within the trip computer menu:
Speed limit:
☞
Move the cursor on the value next to “
Limit:
”.
☞
Push the
OK
key.
☞
Select the desired speed setting with the cursor keys
4
or
6
.
☞
Push the
OK
key to confirm the selection.
Enable/disable speed warning:
☞
Move the cursor on the option next to “
Speed warning:
”.
☞
Push the
OK
key.
☞
Select “
On
” or “
Off
”.
☞
Push the
OK
key to confirm the selection.
If you have enabled the speed warning, a warning beep is heard and a warning
message appears on the display each time you exceed the value stored under “Limit”.
Resetting the trip computer:
☞
Move the cursor on “
Reset Trip comp
”.
☞
Push the
OK
key.
:
All values (except the speed limit) are set to zero.
SYSTEM SETTINGS
40
3112 316 0888.1 Neudruck
Donnerstag, 24. August 2000 11:01:31
Farbprofil: Deaktiviert
Komposit Standardbildschirm