Switching on / off
The navigation system is switched on / off together with the ignition.
☞
Switch on the ignition.
:
As soon as the navigation system is operable, an advice on the use of the system
appears on the display.
☞
Read and confirm this advice by pressing
OK
on the remote control.
:
The “
Main control
” menu appears.
After a few seconds the system is initialized and you can select the navigation
functions (options in highlighted letters).
Stand-by mode
If you do not wish to hear guidance advice, you can set the navigation system to its
stand-by mode.
☞
Select “
Stand-by
” from the main control menu.
:
The display is switched off and audible guidance advice is muted.
☞
Press one of the cursor keys
4
,
6, 8
,
2
or the
OK
key on the remote control to
resume normal operation.
If the navigation system was switched off in stand-by mode, it restarts in stand-by
mode when turning the ignition on again.
Volume
You can adjust the volume of the audible guidance advice as follows:
☞
Push the
+
key once or more than once to increase the volume of the voice
messages.
☞
Push the
-
key once or more than once to decrease the volume of the voice
messages.
:
The adjusted volume is announced.
Theft protection
The navigation system is equipped with a detachable security module. If the security
module is either inserted incorrectly or not inserted at all, the system is blocked and a
message appears on the display.
You can only select the “Stand-by” option, if the security module is not inserted.
A
Always insert the security module before driving and before switching on the ignition.
Removing the security module
☞
Press on the left or right side of the module to remove.
A
Never remove the security module while driving or during operation!
Inserting the security module
☞
Slide the security module to one edge of the front recess.
☞
Push on the module until it clicks into place on both sides.
OPERATION
15
English
3112 316 0888.1 Neudruck
Donnerstag, 24. August 2000 11:01:00
Farbprofil: Deaktiviert
Komposit Standardbildschirm
