VDO Cyclecomputing C1DS, Инструкция по эксплуатации

Страница: 22 / 56

62
GB
C1
DS
C2 DS
C3
DS
C4
DS
2.1 Installing the batteries in the digital transmitter and the computer >>> P02
Both, your VDO computer and your VDO transmitter are coming with a 3 V battery (type
2032).
A. First install the battery in the digital transmitter
Step 1. Place the battery into the transmitter housing, +pole face-up.
Step 2. Make sure the battery is not edged over.
Step 3. Check if the rubber washer is flatly positioned on the battery door.
Step 4. Place the battery door on the compartment, take a coin and twist it to the right until
detent (approx. 1/3 turn).
B. Install the battery in the computer immediatly after the installation of the battery
in the transmitter.
At the initial putting into operation, the computer is automatically trying to find the transmitter.
By this, the computer also learns the transmitters coding