manualshive.com logo in svg

VDO Cyclecomputing C1DS, Инструкция по эксплуатации

Поделиться
Скачать
VDO Cyclecomputing C1DS Скачать руководство пользователя страница 55

95

GB

ranty covers defects in material and workmanship. Defects on cables, senders, transmitters 
and mounting materials resulting from normal wear and tear, improper care, accidents, abuse 
or alteration are not covered by our warranty. Opening the computer housing (except for the 
battery door) is considered abuse, thus not covered by our 5 year warranty.

Please keep your sales receipt to prove that your computer is covered under the war-
ranty in case of legitimate complaints.

In case of legitimate complaints you are entitled to have your computer either repaired or 
replaced with a comparable model. Due t possible model changes, your model might have 
been discontinued.
In the event that you should have a complaint, please first contact the retailer where you pur-
chased your VDO computer. If the retailer is unable to help, you can return your computer to: 

Cycle Parts GmbH, Große Ahlmühle 33, D-76865 Rohrbach.

In case of technical queries, please contact our customer-service-hotline: +49-6349-9635-10. 
Further technical information is available on our website:  http://www.vdocyclecomputer.com
Technical specifications of our computers are subject to change without notice.

Содержание C1DS

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды