![VDH MC3-TM Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/vdh/mc3-tm/mc3-tm_manual_3702720009.webp)
Manual MC3-TM Temperature Monitor
Documentnr.: 131083 version 2.1
Page 9 of 16
The option “Alarm” has the possibility to change the mode. The available choices are “watch
alarm” and “control alarm”. Using watch alarm the analog output that controls the alarm relay will
be set to 10V when there is no alarm and it will be set to 0V when an alarm occurs.
By default the alarm output is set to the first output (on the left of the output board), but when
another output should be used, the value of hardware number can be changed likewise. For the
alarm output 8 options are possible since the output board has 8 analog outputs.
By selecting the button “Submit” at the bottom the selected configuration will be saved on the
MC3-TM and it is ready for use.
It will be used when the MC3-TM is rebooted or when the control application is restarted.
(see 6.6 Restart application).
6.2.
Config overview
This screen shows an overview of the same configuration used in the “Temperature Monitor
config” screen, but here it is shown from a connection point of view. It gives an overview of where
to connect which sensor, input switch, of output.
6.3.
Hardware config
The “Hardware config” screen shows which I/O hardware is available and should only be altered if
hardware is changed/replaced and only in consulting with VDH Products.