Manual MC3-TM Temperature Monitor
Documentnr.: 131083 version 2.1
Page 11 of 16
6.6.
Restart application
After restoring a backup or after changing the “Temperature Monitor config” the new configuration
should be used by the controller. By pressing the “Restart the application” button, the
controlprocess on the MC3-TM is stopped and started again using the new configuration.
6.7.
Modbus access
By default no system has Modbus access to the MC3-TM. In order to give a system access to the
Modbus registers and values, its access needs to be granted. On the “Modbus access” screen this
access can be granted.
Enter an IP address in the field at the top (“Enter IP number to give access:”) and press the button
“Submit”. The entered IP address will be added to the list of permitted systems. If the newly
entered IP address is not shown directly in the whitelist (list of permitted systems), press the
“refresh” button, to refresh the list.
To remove a system from the whitelist, select the radio button in front of its IP address and press
the button “remove”.
