VCON HD5000 Series, Инструкция по установке и настройке

Страница: 38 / 74

Chapter 2 Connecting the HD5000
28 VCON HD5000 Installation & Setup Guide
Connecting the HD5000 to the Power Supply
After you completed all the HD5000’s components connections, you can connect
the HD5000 to a 115 Vac or 230 Vac power supply, depending on the local
electricity grid.
#
To connect the HD5000 to a power supply
1. Next to the power socket on the rear panel of the unit, change the voltage
setting to 115 Vac or 230 Vac if necessary.
2. Insert the power cable into the power socket on the rear panel.
3. Insert the plug into the power supply.
CAUTION The factory default setting corresponds to the voltage of the
electricity supply of your region. As a precaution, check that
the setting is correct before starting HD5000.