VCON HD5000 Series, Инструкция по установке и настройке

Страница: 33 / 74

Chapter 2 Connecting the HD5000
VCON HD5000 Installation & Setup Guide 23
Connecting and Setting Up the Laptop Plug-in
As an option, HD5000 supports the connection of a laptop computer or another PC
for displaying data applications, such as presentations, during conferences. After
the connections, this laptop/PC’s interface may be viewed on the HD5000’s XGA
monitor and sent to the remote side during a conference.
This option includes a Data Sharing card and a tabletop pod. The laptop/PC is
connected to the pod, the pod is connected to the Data Sharing card, which is
installed in a free slot of the HD5000 computer.
#
To install the Data Sharing card
1. Remove the HD5000 computer’s cover.
2. Insert the Data Sharing card into a free PCI slot and secure it in place by
tightening the slot’s retaining screw.
3. Replace the computer’s cover.
4. Turn the HD5000 computer on. During startup, the Found New Hardware
Wizard appears.
5. Select Install from a list or specific location (Advanced) and then click
Next .
6. Select the Search for the best driver in these locations and Search
removable media options and then click Next .
7. Install the Data Sharing Card disc to the DVD drive. Wait while the
system copies drivers to the computer.
8. If you receive a message that the software you’re installing “has not
passed Windows Logo testing...,” click Continue Anyway .
9. Insert the compact disc labeled “Install Disk” into your CD-ROM drive
and click OK .
10. Browse to the W2KDrv file and click OK to copy it.
11. When the Wizard notifies you that installation is complete, click Finish .
DANGER Before installing the Data Sharing card, turn off the
computer and all attached equipment. Disconnect them from
the power supply.