K6/K6N Vacuum Packaging Machine
Maintenance
2002-04-25
Art. no. 519.340
Page 4 8/56
Procedure
§
Remove the panels on the left and back of the
machine.
§
Open the two filler necks (2).
§
Pour in oil until the oil level on the inspection glass
(1) rises up to the “max.“ mark.
§
Place the caps back on the filler necks and fit the
panels back onto the machine.
Fig. 13/9
IMPORTANT
Only use an oil which has been recommended by
the pump manufacturer! Read the section on
“Process oils” for details of the recommended oils.
If an oil with different properties is used, this may
lead to disruptions in operations or to damage!
Fig. 13/10
IMPORTANT
Different types of oil must never be mixed!
WARNING
Before you change the oil, check that the machine is switched off and has been unplugged at
the mains!
IMPORTANT
In order to drain off all the oil, do it while the vacuum pump is still warm after operation if
possible!
Procedure
§
Remove the panel from the left -hand side and
back of the machine.
§
Place a container for the used oil under each of
the two oil drain outlets (3, 4).
§
Unscrew the two caps from the oil filler necks (2).
§
Loosen the screw from the oil drain outlets (3, 4)
and let the used oil drain into the containers.
Fig. 13/11
Содержание K6
Страница 37: ...K6 K6N Vacuum Packaging Machine Operation 2002 04 25 Art no 519 340 Page 37 56 9 5 7 Program table Fig 9 12...
Страница 54: ...K6 K6N Vacuum Packaging Machine Diagrams 2002 04 25 Art no 519 340 Page 5 4 56 17 2 Circuit diagrams...
Страница 55: ...K6 K6N Vacuum Packaging Machine Diagrams 2002 04 25 Art no 519 340 Page 55 56...