VBrick dme, Руководство администратора

Страница: 32 / 219

20 © Vbrick Systems, Inc.
You may also see
Refresh
,
Reset Counters
, and other buttons depending on what page you
are on.
System Reset
R e s e t t h e Sy s t e m
A system reset resets (i.e. reboots) the appliance. It does not change, save, or reset any
configuration parameters.

To reset the DME:
1. Navigate to Maintenance > System Maintenance.
2. Click the
Reset
button under the
System Reset
label.
System Reset
Apply Applies the changes made on the screen to the appliance. Each
configuration page has an
Apply
button. You must click
Apply
before you
exit the page; otherwise your changes will be lost.
Revert Aborts all changes made on the screen and returns to the values that were
present prior to any changes. The
Revert
button restores the values that
were present prior to the last "apply."
Default Returns to the default settings for all parameters on the page. You must still
click
Apply
for these default settings to take effect.
Note : Some changes to the configuration will initiate an automatic reset.
When this happens, wait approximately 60 seconds, then refresh the page
and log back in with your user name and password.