VBOX 3i Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 125

VBOX 3i Скачать руководство пользователя страница 34

08 - VB3i CAN

Racelogic CAN Bus

The

Racelogic CAN bus

connection (

by default) can be used to connect Racelogic modules (i.e. TC8, FIM03

etc), and displays such as VBOX Manager and Multi-Function Display. This port will allow the VBOX 3i to log up to a
maximum of 32 Racelogic module channels.

Note: For the Racelogic CAN port, it is recommended that the

CAN Termination

resistor is on.

Note: VBOX 3i has an additional channel limit of 64. Additional channels consist of VCI channels (up to 16), RL CAN
channels (up to 32) and any other channels that fall outside the channels on the

Standard

tab in VBOX Setup, such as

AD inputs, IMU KF channels, Twin antennas channels, ADAS channels and so on.

Channel selection is controlled using VBOX Setup. Additional channels can be logged by the VBOX 3i up until the point
the Log channel usage is maxed (100%)

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_3i_Range/VBOX_3i_User_Guide_(All_Variants)/08_-

_VB3i_CAN

34

«
...
32
33
34
35
36
...
»

Содержание 3i






























































































































Отзывы:

Нет отзывов