VBM Domobar, Инструкция по эксплуатации

Страница: 72 / 234

24
2
1
E
N
G
7.6,
STEAM DISPENSING.
· Turn the steam lance (1) to the bowl and then make a
short supply dispense of steam by slowly turning the
knob (2) counterclockwise to remove any residual water
present in the circuit.
ATTENTION: The lance (1) is very hot.
Move the lance only with proper rubber
protection; Danger of scalding.
· Remove the steam lance (1) to the outside then put a cup
or a pot full of liquid to be heated under the lance (1).
· Fully immerse the nozzle of the steam lance into
the liquid and slowly open the valve (2) by turning it
counterclockwise.
· Once reached the desired temperature close the tap (2).
· Turn the steam lance (1) to the bowl and then make a
short dispensing to clean the inside of the jet and clean
the nozzle (1) with a damp cloth to prevent the fouling
difficult to remove.