16
■
Input video port selection of transmitter
The transmitter has a 3G SDI video input port and a HDMI video input port,
and the system will detect valid video source automatically of SDI and HDMI
port, and then switch it as main video input channel. If both SDI and HDMI h-
ave valid video input, the system will take SDI input as priority.
■
RSSI indicators
The receiver will calculate received RF signal strength internally and 5 “RSSI”
LEDs will be used to indicate wireless signal power and quality. The user can
observe the RSSI LED status to know if the current wireless link is reliable or
not. From 1 to 5 lit LEDs show RSSI from Min to Max.
Operation instruction
Lit RSSI LEDs volume
Wireless Link quality
Video Quality
4
Strong
Best
2-3
Middle
Good
1 or no lit LED
Weak
Visible Video Noise
■
Frequency selection and configuration
The wireless suite can work in 5.1-5.9GHz frequency band and be flexibly
software configured to licensed or ISM band of global different regions, as
well as the side panel of both transmitter and receiver has been installed a
frequency select knob, which provide maximum 10 workable frequency ch
-
annels, and support maximum 4 sets working simultaneously. See below fre
-
quency knob figure.
SDI in
01
2
4
6
7
8
9
5
3
