e) Ensure the frequency knobs of transmitter and receiver are set with the
same number, and this will make sure the transmitter and receiver work
with same RF frequency.
f ) If the camera is on and video input is OK, TX side ‘video’ indicator will light.
g) Before RX finished wireless link with TX, 4
RSSI’ indicators and ‘Video’
‘
indicators are off; when wireless link is OK, ‘RSSI’ indicators will light first,
and ‘RSSI’ will indicate the received RF signal strength. If the receiver d-
etects wireless video normal internally from air interface, ‘Video’ indicator
will light. Before that, if SDI or HDMI video out port of the receiver has HD
monitor connected, it will display an OSD of ‘Link Connecting……’ like
below picture.
Installation
15
) The system will spend 20-30 seconds on constructing the link, and real link
h
period will depend on the current wireless channel condition. When wireless
-
link is set up, “RSSI” light will light and indicate current received wireless si
gnal strength, as well “Video” indicators will light, and then connected HD
monitor will display the video and audio accordingly.
