12
Receiver side
a) There is one 1/4-20 screw nut in the bottom side of receiver. The user
can utilize a 7'' articulating arm and crab clam to install the receiver on
one tripod.
b) Install battery into battery buckle if your product model includes the option
of battery buckles; please note the battery model must match the battery
buckle type.
c) The user can also utilize a subsidiary LEMO 4 pin-male to D-type recep-
tacle power cable to get power input from an outside power source.
d) All RX installation guidelines see below figure.
Installation
1
2
3
