14
Getting started
After
fi
nishing all steps above, system is workable, follow below steps.
a) Ensure the video source output of the camera is OK, and the HD monitor
is power on and switched to connected video input port.
b) Ensure all input, output SDI or HDMI cables are connected.
c) Ensure 2 TX antennas are installed, and it is better to keep TX 2 antennas
with orthogonal angle each other for best RF performance. Like below
fi
gure.
Operation instruction
d) Ensure both the transmitter and receiver installed the battery or DC input
port connected to outside power source. Then turn power switch of tra-
nsmitter and receiver to 'ON' respectively, then 'Power' indicator will light.
Transmitter
