Page 7 / 16
■
Input the WIFI password of the router and select “Next”.
150616
■ The password should be empty, tap on password
held and select “Next”
.
■ Choose router.
Configuration Method of WPS:
Press the WPS button in the panel of Wifi Security Light
for 5 seconds. The blue indicator will flash rapidly after
entering into the WPS mode. Then press the WPS button
on the router which you would like to connect to Wifi
Security Light (refer to router manual for instructions on
WPS mode operarion).
2.2 Usage of Phone Client Application
Software
■ Enable phone network function, install and run “
Wifi
Security” software.
■ C
lick “Click here to add camera”
■ Input the password of the camera default is blank and
click “Save”. Wifi Security Light will restart. After
restarting, the software can be connected with Wifi
Security Light to see the screen. (you will need to
reconnect to normal WIFI network)
■ S
elect different quick adding modes.
NOTE: You can find the QR code on the light fixture.
■ I
nput username and password and Save
The password of Camera default
is blank, if has been set, user
need input it.
Custom Camera Name
Input route password then
click Next