![background image](http://html.mh-extra.com/html/vax/vx2/vx2_user-manual_857155018.webp)
Vax Careline:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz
17
Maintenance
(Keep your Vax as good as new)
Transport and storage
CAUTION:
Never store the appliance next to heat sources (e.g. heater, oven). Avoid exposing it to direct
sunlight. Heat can damage the appliance.
Always carry the appliance carefully; ideally use both hands.
Always store the appliance in its original packaging in a cool, dry place, and keep it out of reach of children.
NOTE:
It is best to empty the dust bin module after each cleaning session.
However, also empty the dust bin module:
- Prior to a longer period of non use,
- Prior to shipping.
1. Ensure that the appliance is switched off (no LED is lit).
2. Remove the robot’s upper cover (Fig. 23). It might be necessary to press firmly (Fig. 23/arrows) to release
the cover from its locked position.
3. Carefully pull the dust bin module out of the appliance (Fig. 24).
4. Remove the dust bin cover (Fig. 26).
5. Take out the filter (Fig. 27).
6. Tap lightly to knock out both parts and remove coarser debris with your hand.
7. If dust bin and filter can no longer be completely emptied through this measure, proceed as described under
“Cleaning dust bin and filter” on page 18.
8. Insert the filter back into the bin (Fig. 27) and put the dust bin cover back on (Fig. 28).
9. Insert the dust bin module back into the appliance (Fig. 24) and put on the upper cover (Fig. 25). It will audibly
snap into place.
Emptying the dust bin module
23.
24.
25.