Vax Careline:
AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz
7
Operation
Prohibited use
Unpacking
WARNING:
Do not use the robotic cleaner:
- on long pile carpet (i.e. piles longer than 1cm)
- on wet floors
- without the filter, dust bin and covers correctly inserted
CAUTION:
Keep the packaging for storing the appliance, or for safe transport. Always transport or ship the
appliance in its original packaging to avoid damage.
1. Unpack the appliance and its accessories.
2. Check the contents for completeness and possible damage (Machine Overview, page 1).
1. If possible, choose a location where there is no carpet. The rubber feet will adhere better to a level surface.
2. Position the docking station in close proximity to a mains socket.
3. Position the docking station against a wall or a piece of furniture so it will not be moved by the robot.
4. Make sure that there is a space of at least 1 m x 1 m in front of and next to the docking station (Fig. 1).
5. Now remove the 4 protective films from the rubber feet underneath the docking station (Fig. 2) and position
it in a stable manner.
CAUTION:
Rubber may cause unwanted stains or discolouring on certain surfaces such as wood. Check the
floor manufacturer’s recommendations to avoid damage.
6. Have the AC adapter cable placed behind the station (Fig. 3) so that it does not obstruct the robot’s ability to dock.
NOTE:
Also remember not to locate the virtual wall near the docking station. Otherwise your robot may
be obstructed from docking to the station.
Positioning the docking station
1.
2.
3.