11
MAINTENANCE & CLEANING
Emptying and cleaning the dirty water tank
IMPORTANT:
Empty and rinse out the clean water/solution tank and dirty water tank and leave to air dry before refitting.
The dirty water tank is fitted with a float. When the dirty water tank is full, the float will shut off the suction on the machine.
You will be able to hear if this has happened as the motor noise on the machine will increase. Once the float is activated,
empty the dirty water tank if full. If the dirty water tank is not full then turn off your machine at the power switch and wait
for the float to settle.
IMPORTANT:
Unplug and switch off the machine before performing maintenance or troubleshooting checks.
Empty the dirty water
into the sink or toilet.
Rinse the dirty water tank
and lid under water
(max 40°C) to remove
dirt/debris.
40°C
MAX
Press the dirty water tank
release button. Pull and
lift to remove the tank.
Lift the dirty water tank
clip and unhook to release
the lid.
Hook the clip on to the lid
and push down to lock
into place.
Lift the lid to remove from
the dirty water tank.
Refit the dirty water tank
onto the machine so it
clicks into place.
To refit the lid, hook the
tab on the front of the lid
into the tab on the tank
and close in a hinge like
manner.
