Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug
from electrical socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters
to fully dry before putting back into the vacuum machine).
• Clean the pre-motor filter every time the dirt container is emptied and replace the post motor filter every 12 months
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Assembling your vacuum cleaner
Press both buttons at end
of hose and insert into
hose entry point.
Insert hose grip into
telescopic extension tube.
Press button on telescopic
extension tube and adjust
to required length.
Insert the other end of the
telescopic tube into the
floor head.
WARNING
When unwinding the power
cord do not pull further than
the yellow marker.
Getting started
Name
Impact 306
Voltage
220-240V~50Hz
Wattage
700W
Cord length
5.5/5.8/6.0m
Weight
4.9kg
Technical Specification
Filter Kit (Type 105)
1-1-134328-00
Tool Connector (Type 1)
(selected models only)
1-1-133838-00
Turbo Tool (Type 4)
(selected models only)
1-1-134340-00
Combination Floor Tool (Type 6)
1-1-134330-00
Crevice Tool (Type 10)
1-9-128020-00
Dusting brush
1-1-127512-00
Accessories & Consumables
Separator and shroud
Dirt container
Hose
entry point
Carry handle
Cord rewind
button
On/Off button
Dirt container
release button
Floorhead
parking slot
Post motor
filter (hidden)
Pre-motor filter
(hidden)
Post motor
filter cover
Getting to know your machine
