Using your machine
Using the accessories
TIP
Brushes on the floor
head should be visible
when using on
hard floors.
TIP
For best cleaning
performance always
empty before and after
using for wet pick up.
Using for wet pick up
•
IMPORTANT:
The Wet & Dry vacuum is fitted with a float. When the tank is full, the float will shut off the suction to
the vacuum. You will be able to hear if this has happened as the motor noise will increase. Once the float is activated,
switch off the Wet & Dry vacuum and empty the dirty water. If the tank is not full, then turn off the Wet & Dry vacuum
at the power switch and wait for the float under the lid to settle. Always makes sure the float is able to move freely
prior to use.
Choose an accessory and push
onto the hose grip or
extension tube.
Plug into mains and press
the on/off switch to the
I position to switch on.
Choose an accessory and push onto the hose grip or
extension tube.
