PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
Before you begin
•
WARNING:
Always switch off the Wet & Dry vacuum before connecting or disconnecting the hose/attachments,
or emptying the tank.
•
IMPORTANT:
The Wet & Dry vacuum is equipped with a thermal cut-out. If for any reason the Wet & Dry vacuum
does overheat, the thermostat will automatically turn the Wet & Dry vacuum off. If this happens, switch the Wet &
Dry vacuum off and unplug. Empty the tank and also check the Wet & Dry vacuum for blockages. Allow the Wet &
Dry vacuum to cool for approximately 24 hours (if you have cleaned the filter and filter bag please wait 24 hours for
the filter and filter bag to fully dry before putting back into the Wet & Dry vacuum). For best cleaning results the filter
and filter bag require cleaning after every use and replacement every 6 months. If the Wet & Dry vacuum is blocked,
switch off and unplug before removing the blockage.
Assembling your Wet & Dry vacuum
Push the hose firmly into the
hose connection and twist to
lock into place.
Push the other end of the
extension tube onto the
desired accessory.
Insert the hose grip on to
extension tube.
Additional tools can be stored
on the back of the vacuum.
Push together the 2
extension tubes.
