Battery Installation
To get started, insert one of your backup keys into the keyhole at the front of the safe (see Figure A). Push key in
and rotate the key 90 degrees clockwise to open the safe.
Remove crate foam insert. Locate the battery compartment door on the inside of the safe directly behind the '1'
key on the keypad (see Figure B).
Using the Phillips screwdriver provided open the battery cover by removing the
single screw
in the top center of
the battery cover.
Insert the 18650 rechargeable lithium-ion battery (included in box) into the battery compartment. Note that your
Vaultek™ safe automatically detects the polarity of the battery and can be installed in either direction.
When the battery is inserted you will hear a short welcome tone and the keypad will light up.
Once you hear the tone and see the keypad lights up, replace the battery cover and screw. You are now ready to
program your safe. See page 06.
4
5
6
