Programming Additional Fingerprints
The first two fingerprints programmed into the safe are the administrative fingerprints. Any additional users
programmed require authorization from one of these fingerprints.
Open the safe. Program additional fingerprints by quickly pressing and releasing the "PROGRAM" button (Figure I
on page 09). The light above the fingerprint sensor (Figure J on page 09) will turn RED prompting you to scan one
of the administrative fingerprints.
Place one of the first two programmed administrative fingerprints on the scanner and remove when the safe
beeps and the light above the fingerprint sensor turns GREEN. When the ‘1’ button on the keypad starts blinking
RED you can program a NEW fingerprint.
TIP: If the administrative print is left on the scanner too long the safe will begin to program that fingerprint into
the safe again and not the NEW fingerprint. If this happens start over with step one.
Using the helpful programming tips provided on page 08 place the NEW finger on the scanner. When the safe
beeps and the '1' button lights up GREEN remove your finger.
Place finger again over the scanner until the safe beeps and the number 2 lights up GREEN and lift. You will
repeat this process till all keys (1-5) are solid GREEN.
3
4
10 Vaultek™ VT20i
HOW-TO-VIDEOS AVAILABLE
CLICK HERE FOR ACCESS
