Vaughn Featherweight Series, Руководство по эксплуатации и установке

Страница: 26 / 31

25
PARTS LIST
 T&P Relief Valve
– Located above and to the left of hot
water outlet.
 High Limit Safety Switch
– Manual reset switch designed to
shut off all electrical circuits if water reaches the high limit
setpoint.

Electronic Control
– For constant temperature control,
temperature controls are specifically designed for
Featherweight water heaters. Temperature sensors are
located under the plastic jacket and may be located using the
template provided in the replacement kit.

Water Diffuser Dip Tube
– Introduces cold water at the
bottom of the tank in a flat, gentle swirl, preventing turbulent
mixing with heated water above.

Hot Water Outlet Nipple
– Located on the top of the heater
for easy installation and access.
 Wiring & Connections
– Located on the top of the heater for
easy installation and access.

Long-Life Heating Elements
– Waste is reduced with
immersed heating elements because all available heat
passes directly into the water. Low watt density elements
assure longer life
– and reduce mineral buildup.
 Clamp
– Stainless steel removable v-clamp for servicing
heater.
 Drain
–
Easy access to drain the tank located at the bottom
of the heater.

Plastic Jacket
– Durable & easy-to-clean jacket high-density
plastic.
 High-Density Insulation
– Three inches of high-density
foam blanket the storage tank which significantly reduces
heat loss.
NOTE: When ordering parts, please specify model and serial
number of tank, shown on the rating plate, as well as parts name,
information and number. See following page(s).