Vaude BADAWI TARP, Руководство пользователя

Страница: 16 / 54

10
ENGLISH
bands which can be found at the top of the tent, by
the pole sleeves, to the left and right of the entran-
ce
(C) .
5.
Insert the pegs at the lower corners of the tarpaulin
into the metal rings
(D) .
6. Tense the tarpaulin at the front with the aid of tent
pegs and the guy ropes.
tAKE DOWn – gEnErAl InStrUCtIOnS:
• Remove everything from the tent’s interior.
• Freestanding tents can be gently shaken out to
remove leaves, sand, and other debris.
• Turn the tent over with floor facing upward and
allow it to dry a bit longer.
• If it’s not possible to dry the tent completely before
packing it, this should be done within 12 hours to
prevent the risk of mold and mildew growth.
• As in the tent set up, never pull the poles out of the
pole sleeves; rather push them through.
•
When storing a tent in its stuff sack, make sure that
stakes and poles don’t press against the tent fabric
and damage it.
• Before taking down your tent, close all zips and
roll up the guy lines. That way you won’t have to
untangle them when it comes time to set the tent
up again, and pitching is that much easier.
DISmAntlIng – “mODEl­SpECIfIC”:
1. Unfasten the webbings bands of the tarpaulin, pull
out the tent pegs and remove the tarpaulin pegs
from the tent.
2. Push the poles out of the sleeves (Do not pull!).
3. Fold up the poles and roll up with the tent, if possib-
le. Do not force the poles into the storage bag, if it
is full.
StOrAgE/CArE/rEpAIrS:
•
As soon as the tent is dry and clean it can be stored
in its pack sack in a well-ventilated, cool and dry
place. Please do not store the tent near paints, ad-
hesives, oils, plastics, or fuels (gas canisters, etc.)!
The gasses emitted from these materials contain
plasticizers that can damage your tent over time.
• Zips are always a weak point in a tent’s structure.