Vatech PaX-i Insight, Руководство пользователя

Страница: 16 / 152

1. Introduction
6 PaX-i Plus / Insight Installation Manual
Installation Site

The PC monitor, emergency cut off switch and X-ray Exposure
Switch should be installed in the vicinity of the operator so that
he or she can manage them simultaneously in an emergency.

Proper shielding of the room is essential: Since these
requirements vary depending on the country, it is the installer’s
responsibilities to verify that all applicable radiation safety
requirements are met.

This equipment should not be installed in the immediate vicinity
of other devices.

Do not install the equipment in an area that is exposed to
strong electromagnetic fields.

Do not install this system in an area where there is the risk of
an explosion.

The electrical installation of this system shall comply with all
local code requirements for electro-medical systems: IEC
60364-7-710:2002.

It is strongly recommended that a UPS be installed at the same
time as the equipment.

The equipment, PC, and all peripheral devices must be well
grounded.
Warnings Regarding X- r ay Radiation

Failure to install this equipment in an approved location may be
dangerous to the patient and operator.

Stationary radiation shielding must be installed to protect the
operator from radiation.

The X-ray system may cause injury to the patient if improperly
used. Obey all federal and municipal standards regarding
radiation safety.

When exposing the patient to the X-ray, the operator must be
behind a protective wall or take other protective actions. The
operator should remain at least 2 m (7 feet) away from the X-ray
when pressing the
Exposure Switch and observe the patient
and capture-progression.

Operators must provide protective clothing to the patient before
X-ray capturing. Pregnant women must consult with a doctor
prior to being exposed to an X-ray.