Fig.1 Fig.2 Fig.3
4.
Place an espresso cup you have prepared on drip plate. Make sure the steam knob is at
the “O” position.
5.
Note:
As the appliance is not equipped with any cup or jug, prepare your own jug or cup.
6.
Connect into power source, press down the ON/OFF button “
”
to turn on the unit. The
power indicator (red) will be illuminated.
7.
Press down the pump control button
“
”
, the pump will pump water, when there is water
flowing out and close the pump by pressing the pump control button
“
”
again.
8.
Make sure the coffee/steam button
“
”
/
“ ”
is at the higher position and wait for a
moment, the appliance begin preheating until the coffee indicator (green) illuminates, it
means that the preheating is finished.
9.
Press down the pump control button
“
”
again, and water will flow out.
10.
After water has flown for 1 minute, press the pump control button
“
”
, you can pour
out the water in each container then clean them thoroughly, now you can start brewing
coffee.
Metal funnel holder
